+
  • 干燥混合机.jpg

Dry mixing machine


Contact us

Details


Overview
 
The RDS vertical ribbon mixer has no transmission mechanism in the cylinder, which fundamentally eliminates material contamination caused by lubricant leakage, and is reliable and stable in operation. It is especially suitable for mixing powder and particles with high hygienic requirements. It is also suitable for viscous fluids. Or a mixture of thick, wet, and paste-like materials.
 
The local agitator consists of a stirring spindle and two spiral belts and spiral blades that match the surface of the inner wall of the cylinder. When rotating, the ribbon and the spiral blade spiral the material from bottom to top along the inner wall of the cylinder. At the same time, due to the different linear speeds of the dots on the ribbon belt during operation, the material generates irregular convection and shear under the action of the material. Cut, blend, and diffuse to form a full range of three-dimensional motion. The center of the agitator shaft is a spiral blade. When it is running, it will lift and throw the material at the center. A part of the material thrown into the spiral belt will be absorbed into the spiral envelope of the spiral blade. Upgrade. This cycle is repeated repeatedly, so that the material can be evenly mixed in a short time.
 
This machine is widely used in the mixing of chemicals, pesticides, dyes, medicine, feed, fertilizer, metallurgy, mining, food, plastics, additives and other industries.
 
 
 
Characteristics
 
The machine is driven by a reducer to directly rotate the agitator.
 
There is no transmission mechanism in the cylinder, which fundamentally eliminates material pollution caused by leakage of lubricating oil.
 
The gap between the outer ribbon and the container wall is very small to prevent material sticking
 
The machine has a compact structure and a small footprint.
 
The machine is easy to discharge and can be completely discharged 100%.
 
 
 
Alternative menu
 
1. The cylinder can be designed in the form of a jacket. When the jacket is connected with a certain temperature medium, it can meet the requirements of the user for process temperature control.
 
2. can be designed to provide equipment under vacuum or under pressure conditions.
 
3. It can be designed to provide a liquid spraying device to spray an appropriate amount of liquid into the material.
 
4.can increase the chopping device, can shred aggregates of any size to meet the process requirements.
 
5. a variety of sealing devices are available: packing seal, mechanical seal, lip seal.
 
6. a variety of discharge valves are available: butterfly valve, hemisphere valve, ball valve, knife door valve.
 
7.a variety of materials to choose from: carbon steel, 304 stainless steel, 316 stainless steel and other materials can choose.

 

Dry mixing machine

  1. Reducer (motor) 2. Support cavity 3. Bearing 4. Sealing part 5. Cover 6. Tube 7. Screw-type mixing shaft 8. Discharge valve

 

Parameters Table

 

Model
Inner diameter of the cylinder mm
Full volume m3
Working volume m3
Power KW
RDS-0.05
520
0.05
0.03
0.75-1.1
RDS-0.1
630
0.1
0.06
1.5-2.2
RDS-0.3
800
0.3
0.18
2.2-3
RDS-0.5
900
0.5
0.3
3-4
RDS-0.8
1000
0.8
0.5
4-5.5
RDS-1
1200
1
0.6

5.5-7.5

RDS-1.6
1400
1.6
1
7.5-11

RDS-2

1500

2
1.2
7.5-11
RDS-3
1600
3
1.8
11-15
RDS-4
1800
4
2.5
15-18.5
RDS-5
1900
5
3
18.5-22
RDS-6
2000
6
3.6
22-30
RDS-8
2200
8
4.8
30-37