+
  • 内加热立式螺带混合机.jpg

Heated vertical ribbon mixer


Contact us

Details


Overview
 
The inner heating ribbon drying mixer is a kind of screw belt for rotating the material and the conical jacket and the hollow ribbon to simultaneously enter the heat transfer medium (such as hot water, heat transfer oil, steam, etc.), so that the heated material is surrounded by the surrounding material. Lift and fall from the middle, quickly and continuously cycle over, and take the water vapor in time through the cylinder to make the material dry and mix in a short time. Compared with the traditional vertical mixer, there is no transmission mechanism in the cylinder, which fundamentally eliminates the material pollution caused by the leakage of lubricating oil, and the operation is reliable and stable. It is especially suitable for the mixing of powder and particles with high hygienic requirements. Mixing and mixing of viscous fluid or thick and wet main materials; compared with other horizontal mixers, it has convenient discharging and can be completely discharged 100%, which is convenient for operation and maintenance.
 
 
Characteristics
 
◆The machine is driven by the reducer to directly rotate the agitator.
 
◆ Wide application range, can be used for mixing powder and powder, powder and liquid, and also as reaction equipment and drying equipment.
 
◆The spray device can be added according to the user's requirements to spray an appropriate amount of liquid into the material.
 
◆The speed can be adjusted according to the process requirements. When the speed is low, the drying effect is dominant; when the speed is high. The mixing effect is dominant, so by selecting this equipment, two equipments can be used to achieve the goal, and now it can be combined to save costs.
 
 
Technical Parameters
 
Type Inner diameter of the cylinder mm Full volume m3 Working volume m3 Stirring speed rpm Power KW
RDG-0.8 1100 0.8 0.5 5~45 7.5
RDG-1.5 1400 1.5 1 5~45 11
RDG-2.3 1600 2.3 1.5 5~45 15
RDG-3.3 1800 3.3 2.1 5~45 18.5

Note: The reference power can vary with the material characteristics (please consult Nantong Ross for specific parameters)